Harman-kardon AVR 430 Manuel d'utilisateur télécharger pdf (Page 22)

SYSTEM CONFIGURATION

22 SYSTEM CONFIGURATION22 SYSTEM CONFIGURATION

Figure 3

The first line controls whether or not the bass/treble

tone controls are in the signal path. The normal default

is for them to be in-line, but if you wish to remove

them from the circuit for “flat” response, first make

certain that the

➔ cursor is pointing to the TONE

line on the menu and press the ‹/› Navigation

Button

o so that OUT is highlighted in reverse

video.

If you wish to leave the tone controls in the signal

path, the amount off boost or cut for bass and treble

may be adjusted by pressing the

⁄/¤ Navigation

Button

o so that the ➔ cursor is next to the line

for the setting you wish to adjust. Next, press the

‹/› Navigation Button o until the desired

setting is shown.

This menu also includes a setting to turn the unit’s

upsampling feature on or off. In normal use, this

feature is turned off, which means that digital sources

are processed at their native sample rate. For

example, a 48kHz digital source will be processed

at 48kHz. However, the AVR 430 allows you to

upsample the incoming 48kHz signals to 96kHz

for added resolution.

To take advantage of this feature, press the

⁄/¤

vigation Button

o so that the ➔ cursor is next

to the

UPSAMPLING line and press the ‹/›

viga

tion Button

o so that ON is highlighted in

reverse video. Note that this feature is only available

for the Dolby Pro Logic II-Music, Dolby Pro Logic II-

Movie and Dolby Pro Logic.

When all desired changes have been made on this

menu, press the

⁄/¤ Navigation Button o

so that the ➔ cursor is next to the BACK

MAIN MENU

line and press the Set Button

Surround Setup

he next step is to set the surround mode you wish

to use with the input that was previously selected in

the

INPUT menu. Since surround modes are a

matter of personal taste, feel free to select any mode

you wish – you may change it later

However, to make

it easier to establish the initial parameters for the

VR 430, it is best to select Dolby Pro Logic II (Movie

or Music) or Logic 7 (Cinema or Music) for most ana-

log inputs and Dolby Digital for inputs connected to

digital sources. In the case of inputs such as a CD

Player

, Tape Deck or Tuner, you may wish to set the

mode to Stereo (“Surround off”) as they are not typi-

cally used with multichannel program material, and it is

unlikely that sur

round-encoded material will be used.

Alter

natively, the

Logic 7 Music mode is a good choice

for stereo-only source material.

See page 32 for more

information on available surround modes.

For digital program material, the AVR will always

examine the data stream and automatically select a

Dolby Digital or DTS mode as applicable.

It is easiest to complete the surround setup using the

full-OSD on-screen menus. From the

MASTER

MENU (Figure 1), press the

⁄

Navigation

Button

o until the ➔ cursor is next to the

SURROUND SELECT line. Press the Set

Button

q until the SURROUND SELECT

menu (Figure 4) is on the screen.

Figure 4

Each of the option lines on this menu (Figure 4)

selects the surround mode categor

y, and within each

of those categories there will be a choice of the

specific mode options.

The choice of modes will vary according to the speaker

configuration in your system.

When the SURR

BACK

line of the SPEAKER SETUP menu

(Figure 6) is set to

NONE the AVR 430 will be con-

figured for 5.1-channel operation, and only the modes

appropriate to a five-speaker system will appear. When

the

SURR

BACK

line of the SPEAKER

SETUP

menu (Figure 6) is set to SMALL or

LARGE, the AVR 430 will be configured for

6.1/7.1-channel operation, and additional modes

such as Dolby Digital EX and DTS-ES will appear

they are only available when seven main speakers are

present.

In addition,

some of the modes available in

the AVR 430 will not appear unless a digital source is

selected and is playing the correct bitstream.

o select the mode that will be used as the initial

default for an input,

first press the

⁄

vigation

Button

o until the on-screen cursor is next to the

desired mode’s master category name, such as

DOLBY SURR, DTS, DSP (SURR) or

VMAx.

Next, press the

Set Button q to view the

submenu. Press the

‹

›

Navigation Button o to

scroll through the available choices, and then press the

Navigation Button o so that the cursor is next

BACK

TO MASTER MENU

to continue

the setup process

On the

DOLBY SURROUND menu (Fig. 5),

choices include Dolby Digital, Dolby Pro Logic II, Dolby

Pro Logic IIx, Movie and Music, Dolby Pro Logic and

Dolby Virtual Speaker Reference or Wide. For a

complete descripton of the different Dolby Surround

modes, see page 32. The Dolby Digital EX and Dolby

Pro Logic IIx modes are only available when the

system is set for 6.1/7.1 operation by configuring

the Surround Back speakers to “Small” or “Large” as

described on page 24. When a disc is playing with a

Dolby Digital soundtrack that contains a special “flag”

signal in the data stream, the Dolby Digital EX mode

will be selected automatically. It may also be selected

using this menu or through the front-panel or remote

controls as shown on page 31. A complete explana-

tion of these modes is found on page 32.

Figure 5

When the ➔ cursor is pointing to the MODE line,

press the

‹

›

Navigation Buttons o to select the

desired Dolby surround mode, again remembering that

the choice of available modes will vary with the type of

program material being played and the number of

speakers in your system configuratioin.

When Dolby Pro Logic II Music or Dolby Pro Logic IIx

Music is selected as the listening mode

three special

settings are available to tailor the sound field to your

listening room environment and your individual taste

and preferences. (When other Dolby Surround modes

are selected, dotted lines will indicate that these set-

tings are not active.)

•

Center

Width:

This setting adjusts the balance of the

vocal information in the front soundstage between

the center and front left/right speakers. The lower

** DOLBY SURROUND **



ODE: DOLBY PLII

MUSIC

CENTER WIDTH: 3

DIMENSION: 0

PANORAMA: OFF ON 

NIGHT: -----



BACK TO SURR SELECT



→→

** SURROUND SELECT **



DOLBY SURR

DTS

LOGIC 7

DSP (SURR)

VMAx

STEREO



BACK TO MASTER MENU

→→ 

* AUDIO SETUP * 



TONE :IN OUT

BASS :0

TREBLE :0

UPSAMPLING :ÐÐÐ



BACK TO MASTER MENU



→→ 



1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Harman-kardon AVR 430 Manuel d'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Harman-kardon AVR 430