Harman Kardon AVR 7000 Manuel d'utilisateur télécharger pdf (Page 31)

31 ADVANCED FEATURES

Advanced Features

The AVR 7000 is equipped with a number of

advanced features that add extra flexibility to

the unit’s operation.While it is not necessary

to use these features to operate the unit,they

provide additional options that you may wish

to use.

Front Panel Input/Output Connections

Like many audio/video receivers, the AVR 7000

offers front panel audio/video inputs that

simplify the temporary connection of portable

audio players, video games and camcorders so

that they may be used as input sources for your

system. In addition to the standard left/right

audio and composite video, the AVR 7000 also

includes an S-Video connection.

However, unlike other products,the front panel

connections on the AVR 7000 may be used as

an output as well as an input.This means that

you may make a simple or temporary connec-

tion to a portable tape, MD or optical disc

recorder or to a computer so that it may record

the program source currently playing through

the AVR 7000.This is an exclusive Harman

Kardon feature.

In normal operation,the front panel Video 4

Connections $ are configured as an input.

Their use as an input is indicated by the green

color of the Video 4 Status Indicator %.

To temporarily switch the Video 4 connections

to an output, you will need to make an adjust-

ment in the ADVANCED SELECT menu

(Figure 1).To start the adjustment, press the

OSD button s to bring the MAIN

AUDIO SETUP menu (Figure 1) to the

screen. Press the

Button g six times, until

the on-screen

›

cursor is next to the

ADVANCED line. Press the Set Button i

to enter the ADVANCED SELECT menu

(Figure 8).

Figure 8

The default setting for the Video 4 jacks is used

when the jacks are used as inputs.To change

them to an output, make certain that the on-

screen

›

cursor is next to the VIDEO 4 line,

and press the

›

button so that the word

OUT is highlighted in the video display.At the

same time, note that Video 4 Status

Indicator % will turn red,to indicate the out-

put status. If you wish to make other adjust-

ments, press the

⁄

buttons g until the

on-screen

› cursor is next to the RETURN

TO MAIN MENU line. If you have no other

adjustments to make, press the OSD button

s to exit the menu system.

Once the Video 4 jacks have been switched to

an output, the signal currently selected as the

AVR 7000’s input will be fed to these jacks.

Note, however, that like the other record out-

puts, only analog sources will be fed to these

jacks.When either a digital input or the 6-

Channel Direct input is in use, the signal will

not be fed to these jacks.

Switching the front panel jacks to output status

is temporary and it will be cancelled when the

AVR 7000 is turned off.When the unit is turned

back on, the jacks will revert to the default sta-

tus as an input.To return the front panel jacks

to input use without turning the unit off, use

the on-screen menu system as outlined above

and switch the setting so that the word IN is

highlighted on the Video 4 line.

Display Brightness

The AVR 7000’s front panel display indicators

Ò are set at a default brightness level that is

sufficient for viewing in a normally lit room.

However, in some home theater installations,

you may wish to occasionally lower the bright-

ness of the display, or turn it off completely.

To change the display brightness setting for a

specific listening session, you will need to make

an adjustment in the ADVANCED

SELECT menu.To start the adjustment,

press the OSD button s to bring the main

audio setup menu to the screen. Press the

Button g six times, until the on-screen

›

cur-

sor is next to the ADVANCED line. Press the

Set Button i to enter the ADVANCED

SELECT menu (Figure 8).

To change the brightness setting, at the

ADVANCED SELECT menu, make cer-

tain that the on-screen

›

cursor is next to the

VFD line, and press the press the

›

Button

until the desired brightness level is high-

lighted in the video display.When FULL is

highlighted, the display is at its normal bright-

ness.When HALF is highlighted, the display

is at half the normal brightness level.When

OFF is highlighted, all of the indicators in the

Information Display Ò will go dark.Note,

however, that the green LEDs for the Input

Indicators Ó and the Surround Mode

Indicators `, as well as for the Power

Indicator 3,will always remain lit to remind

you that the unit is turned on.

The display brightness may also be changed by

pressing and holding the Set button ( on the

front for three seconds until the message in the

Main Information Display W reads VFD

FULL.Within five seconds, press the front

panel Selector buttons 5 until the desired

brightness display level is shown.At that point,

press the Set button W again to enter the

setting.

Once the desired brightness level is selected, it

will remain in effect until it is changed again or

until the unit is turned off.

If you wish to make other adjustments, press

the

⁄

Buttons g until the on-screen

›

cursor is next to the RETURN TO MAIN

MENU line. If you have no other adjustments

to make, press the OSD Button s to exit the

menu system.

Turn On Volume Level

As is the case with most audio/video receivers,

when the AVR 7000 is turned on, it will always

return to the volume setting in effect when the

unit was turned off.However, you may prefer to

always have the AVR 7000 turn on at a specific

setting, regardless of what was last in use

when the unit was turned off.To change the

default condition so that the same volume level

is always used at turn-on,you will need to

make an adjustment in the ADVANCED

SELECT menu.To start the adjustment,

press the OSD button s to bring the main

AUDIO SETUP menu (Figure 1) to the

screen. Press the

button g six times,

until the on-screen

›

cursor is next to the

ADVANCED line. Press the Set button i

to enter the ADVANCED SELECT menu

(Figure 8).

At the ADVANCED SELECT menu make

certain that the on-screen

›

cursor is next to

the volume default line by pressing the

⁄

buttons g as needed. Next, press the press

the

›

button so that the word ON is

highlighted in the video display. Next,press the

button g once so that the on-screen

›

cursor is next to the DEFAULT VOL SET

line.To set the desired turn-on volume, press

* ADVANCED SELECT *

VIDEO 4: IN OUT

VFD : FULL HALF OFF

VOLUME DEFAULT :OFF ON

DEFAULT VOL SET:Ð25dB

SEMI OSD :OFF ON

SEMI OSD TIME OUT: 35

FULL OSD TIME OUT:20S

RETURN TO MENU

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Harman Kardon AVR 7000 Manuel d'utilisateur Page 31

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Harman Kardon AVR 7000