Harman-kardon AVR 110 Manuel d'utilisateur télécharger pdf (Page 12)

12 REMOTE CONTROL FUNCTIONS

Remote Control Functions

IMPORTANT NOTE:The AVR 110’s remote

may be programmed to control up to eight

devices, including the AVR 110.Before using the

remote, it is important to remember to press the

Input Selector button e that corresponds to

the unit you wish to operate. In addition, the

AVR 110’s remote is shipped from the factory to

operate the AVR 110 and most Harman Kardon

CD or DVD players and cassette decks.The

remote is also capable of operating a wide vari-

ety of other products using the control codes

that are part of the remote. Before using the

remote with other products, follow the instruc-

tions on pages 27–29 to program the proper

codes for the products in your system.

It is also important to remember that many of

the buttons on the remote take on different

functions, depending on the product selected

using the Input Selectors eg.The

descriptions shown here primarily detail the

functions of the remote when it is used to oper-

ate the AVR 110. (See page 30 for information

about alternate functions for the remote’s but-

tons.)

a Power On Button: Press this button to

turn on the power to a device selected by press-

ing one of the Input Selectors e.

b IR Transmitter Window: Point this win-

dow towards the AVR 110 when pressing buttons

on the remote to make certain that infrared com-

mands are properly received.

c Program Indicator:This LED indicator is

used to guide you through the process of pro-

gramming the remote. (See page 27 for infor-

mation on programming the remote.)

d Power Off Button: Press this button to

place the AVR 110 or a selected device in the

Standby mode.

e Input Selectors: Pressing one of these

buttons will perform three actions at the same

time. First, if the AVR 110 is not turned on, this

will power up the unit. Next, it will select the

source shown on the button as the input to the

AVR 110. Finally, it will change the remote con-

trol so that it controls the device selected.After

pressing one of these buttons you must press

the AVR Selector button f again to oper-

ate the AVR 110’s functions with the remote.

f AVR Selector: Pressing this button will

switch the remote so that it will operate the

AVR 110’s functions. If the AVR 110 is in the

Standby mode, it will also turn the AVR110 on.

g AM/FM Tuner Select: Press this button to

select the AVR 110’s tuner as the listening

choice. Pressing this button when the tuner is

already in use will select between the AM and

FM bands.

h Test Button: Press this button to begin

the sequence used to calibrate the AVR 110’s

output levels. (See page 18 for more information

on calibrating the AVR 110.)

i Sleep Button: Press this button to place

the unit in the Sleep mode.After the time

shown in the display, the AVR 110 will auto-

matically go into the Standby mode. Each press

of the button changes the time until turn-off in

the following order:

Note that this button is also used to change

channels on your TV when the TV is selected.

When the AVR 110 remote is being programmed

with the codes to operate another device, this

button is also used in the “Auto Search” process.

(See page 27 for more information on program-

ming the remote.)

jSurround Mode Selector: Press this

button to begin the process of changing

the surround mode. After the button has

been pressed, use the

⁄

buttons mq

to select the desired surround mode. (See page

23 for more information.) Note that this button

is also used to tune channels when the TV is

selected using the device Input Selector

e. When the AVR 110 remote is being pro-

grammed with the codes of another device, this

button is also used in the “Auto Search”

process. (See page 27 for more information on

programming the remote.)

k Night Mode: Press this button to activate

the Night mode.This mode is available in spe-

cially encoded digital sources, and it preserves

dialog (center-channel) intelligibility at low

volume levels.

l Channel Select Button: This button is

used to start the process of setting the AVR 110’s

output levels to an external source. Once this but-

ton is pressed,use the

⁄

buttons mq to

select the channel being adjusted, then press the

Set button o,followed by the

⁄

buttons

mq again,to change the level setting. (See

page 18 for more information.)

⁄

Button:This multipurpose button is

used to change or scroll through items in the on

screen menus, or to change configuration set-

tings such as output levels.When changing an

item such as the surround mode or digital input

directly, first press the function or mode to be

changed (e.g., press the Surround Mode j

to select a surround mode or the Digital button

p to change the digital input) and then press

this button to scroll through the list of available

choices.

‹

Button:This button is used to change

the menu selection or setting during some of

the setup procedures for the AVR 110.

o Set Button: This button is used to enter

settings into the AVR 110’s memory. It is also

used in the setup procedures for delay time,

speaker configuration and channel output level

adjustment.

p Digital Select: Press this button to assign

one of the digital inputs gh$ to a source.

(See page 23 for more information on using

digital inputs.)

Button:This multi-purpose button is

used to change or scroll through items in the on

screen menus, or to change configuration set-

tings such as output levels.When changing an

item such as the surround mode or digital input

directly, first press the function or mode to be

changed (e.g., press the Surround Mode j

to select a surround mode or the Digital button

p to change the digital input) and then press

this button to scroll through the list of available

choices.

r Numeric Keys:These buttons serve as a

ten-button numeric keypad to enter tuner preset

positions.They are also used to select channel

numbers when TV has been selected on the

remote, or to select track numbers on a CD,

DVD or LD player, depending on how the

remote has been programmed.

s Tuner Mode: Press this button when the

tuner is in use to select between automatic

tuning and manual tuning.When the button is

pressed so that the AUTO indicator V goes

out, pressing the Tuning buttons u8 will

move the frequency up or down in single-step

increments.When the FM band is in use, press-

ing this button when a station’s signal is weak

will change to monaural reception.(See page

25 for more information.)

min

OFF

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Harman-kardon AVR 110 Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Harman-kardon AVR 110